Fiber Optic Structured Cabling Archives | Page 7 of 7

SUPRANET / ONE-CLICK CLEANER (LC, MU)

SKU: SP-LFO-1.25

ONE-CLICK fiber optic cleaner. Designed specifically to work well with LC and MU connectors, this tool cleans ferrule end faces, removing dust, grease, and other residue without nicking or scratching the ferrule face.

Features:

A simple push motion engages the connector and activates the cleaner.
Disposable, with more than 800 cleanings per unit
Made of anti-static resin
The cleaning microfibers are densely interwoven and leave no residue
The extendable tip reaches recessed connectors
The cleaning system rotates 180º for complete wiping

SUPRANET / ONE-CLICK CLEANER (SC, FC, ST)

SKU: SP-LFO-2.5

ONE-CLICK fiber optic cleaner. Designed specifically to work well with SC, FC and ST connectors, this tool cleans ferrule end faces, removing dust, grease and other residue without nicking or scratching the end face.

Features:

A simple push motion engages the connector and activates the cleaner.
Disposable, with more than 800 cleanings per unit
Made with antistatic resin
The cleaning microfibers are densely interwoven and lint-free
The extendable tip reaches recessed connectors
The cleaning mechanism rotates 180º for a complete sweep

Vertical Dome Splice Closure for Fiber Optics

SKU: SP-MUFAXX

Vertical splice closure for splices and fiber segregation of up to 96 optical fibers. For indoor and outdoor use, on walls, poles, underground handholes, conduits, etc. 4 oval entries that allow the passage of 1 or 2 cables.

Features:

Ready for wall or pole installation.
Easy mounting and mechanical retention of drop cables.
Fiber storage capacity. Up to 96 fibers.
Includes accessories for internal cable management.
Material: UV-resistant engineering plastics
Cable inlets: 2 or 3
Cable outlets: 2 or 3
Cable diameter: 7 to 22 mm
Height: 540 mm
Width: 210 mm
Operating temperature: -40 to +75ºC

VISUAL FAULT LOCATOR

SKU: VFL-SUP

The 650 nm visual fault locator is used to identify the bit error rate (BER) and locate faults in single-mode (SM) or multimode (MM) fiber optic networks; it is a useful complement for OTDR dead zones, as well as a telecommunications network tool.

Features:

Supports CW and 2 Hz modulation operating modes.
Rugged: uses a special laser-end design to prevent damage if dropped on the “floor”.
Long battery life: uses an efficient laser control circuit to ensure the 1 mW/650 nm locator can operate continuously for more than 10 hours.
Stable output power: uses a special laser driver circuit that ensures stable output power even with a low battery.
2.5 mm universal adapter: uses a 2.5 mm universal adapter, compatible with SC, ST, and FC.

All products have been shown.

Fiber Optic Structured Cabling